auto relay manufacturer, custom car relay wholesaler from China ELE Electric Products

auto relay

Founded in 1996, China ELE Electric Products Co., Ltd is professional auto relay manufacturer and supplier specializing in developing and producing all kinds of electrical products and accessories. As an enterprise certified by ISO9001 system strictly, we have also got many safety certificates, such as CB, SEMKO, FIMKO, ESC, CCC, VED, UL, CE etc. We have great capacity to develop new car relay products, plastics and mental products according to our clients.

Contact Us

E-mail:
sales@eleelectric.com

DOT Approved
3 Pole (3 Pin)
All electronic (Solid State, not mechanical)
Mounting adapter, wire harness and ground wire included
Works on both LED and regular filament bulb turn signals
When converting incandescent turn signal bulbs into LEDs, the "flash rate may be too fast. A common solution is to purchase and install two or more load equalizers. However, load equalizers may produce dangerous heat and they use just as much power as the original incandescent bulbs. This fully solid-state relay uses advanced electronic technology to adjust the flash rate of ANY LED turn signal to a standard 60 per minute flash rate and NO HEAT is generated. It uses virtually no power and is plug-n-play compatible with any motorcycle. Technical Specifications - Maximum operation amperage: 15A - Minimum operation amperage: 0.1A

Great for isolating second battery in boats making it dedicated only to the stereo system.
Keeps primary starting battery from being drained to the point of stranding you in the middle of
Unlike Dual Battery Isolators, the PAC-200 does not create any voltage drop to the secondary
The PAC-200 handles 200 amps continuous and 300 amp surges. Durable weatherproof construction. A must for multi-battery systems, allows for longer battery life and control over which battery is being used. Great for isolating second battery in boats making it dedicated only to the stereo system. Keeps primary starting battery from being drained to the point of stranding you in the middle of lake, river or ocean. Unlike Dual Battery Isolators, the PAC-200 does not create any voltage drop to the secondary battery. The relay will handle 200 amperes on a continuous basis at 12 VDC and 300 Amperes in rush peak or surge. Mount the relay between batteries as an isolator or in the main power lead servicing the mobile audio system, amplifiers, light bars or any other equipment requiring on/off control. INSTALLATION INSTRUCTIONS: The two small terminals are for switching the relay on and off. Either one of the small terminals should be connected to chassis ground or other ground location and the other terminal to switching power output. Switching power must be between 10 and 16 VDC. The relay coil draws less than 1amp when switched on. Battery or main power leads use the two large terminals. Either one may be incoming power. Fuse power leads as close to battery or batteries as possible.